How to take keys off a keyboard and put them back on

How to take keys off a keyboard and put them back on

How to Take Keys Off a Keyboard and Put Them Back On

Whether you're cleaning your keyboard or replacing a faulty key, knowing how to properly remove and reattach keyboard keys can be a useful skill. Here's a step-by-step guide to help you safely take keys off a keyboard and put them back on.

Tools You Might Need


  • - Keycap puller (optional but recommended)
  • - Flathead screwdriver or plastic pry tool
  • - Compressed air canister (for cleaning)
  • - Isopropyl alcohol and cotton swabs (for cleaning)

Step-by-Step Guide

Removing Keyboard Keys

1. Turn Off and Unplug the Keyboard:

- If you're working with a wired keyboard, unplug it from your computer. For wireless keyboards, remove the batteries. This is a safety measure to prevent any accidental key presses.

2. Identify the Key Type:

- Different keyboards have different keycap designs. Mechanical keyboards often have keys that are easier to remove and reattach compared to membrane keyboards.

3. Use a Keycap Puller or Flathead Screwdriver:


  • - With a Keycap Puller:
  • - Position the puller around the keycap you want to remove.
  • - Gently pull upward until the keycap pops off.
  • - Without a Keycap Puller:
  • - Use a flathead screwdriver or plastic pry tool. Slide it under the edge of the keycap.
  • - Carefully twist or lever it upwards until the keycap comes loose.

4. Remove Larger Keys (Shift, Enter, Spacebar):

- Larger keys may have stabilizers underneath. Be gentle and lift one side at a time to avoid damaging these stabilizers.

Cleaning the Keyboard

1. Clean the Keycaps:

- Soak the keycaps in warm, soapy water for a few hours.
- Rinse and let them dry completely before reattaching them.

2. Clean the Keyboard Base:

- Use compressed air to blow away dust and debris from the keyboard base.
- Use a cotton swab dipped in isopropyl alcohol to clean around the switches or membrane areas. Be careful not to use too much liquid.

Reattaching Keyboard Keys

1. Position the Keycap:

- Align the keycap with its switch or membrane. For larger keys, ensure the stabilizers are correctly positioned.

2. Press Down Firmly:

- Gently but firmly press the keycap down until you hear or feel it snap into place. For mechanical keyboards, you should hear a distinct click.

3. Test the Key:

- Press the key to ensure it moves smoothly and registers correctly. If it feels sticky or doesn't press down properly, remove it and try reattaching it.

4. Reattach Larger Keys:

- For keys with stabilizers, ensure the stabilizers are properly inserted into their slots before pressing down the keycap.

Tips and Warnings


  • - Be Gentle: Excessive force can damage the keycaps or the switches.
  • - Keep Track of Keys: If you're removing multiple keys, it's helpful to keep them organized to make reattachment easier.
  • - Consult Your Keyboard's Manual: If you're unsure about removing keys, refer to your keyboard's manual for specific instructions.

By following these steps, you can safely and effectively remove and reattach keyboard keys, ensuring your keyboard stays clean and functional.

Leave a comment

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.